Systems - GridPoint Intelligence - Dashboard

Published November 3rd, 2025 by Brian Matheron

GridPoint Intelligence Dashboard provides a top-down map view of all of your sites while simultaneously providing users with a summary of on-going equipment alerts. Alerts can be managed from this view or users can drill down deeper to the site or individual asset view. Dashboard Dashboard View Navigating to the Dashboard Log in to GridPoint Intelli

Systems - GridPoint Intelligence - HVAC Optimal Start & Stop

Published July 29th, 2025 by Brian Matheron

What is Optimal Start/Stop? Optimal Start/Stop allows for early starting/stopping to ensure your HVAC units run at maximum efficiency while also maintaining comfort.  Optimal Start: Allows your HVAC to start early based on your schedule and comfort settings to allow maximum efficiency. This means your site is ready for employees and customers when t

Update Your HVAC Setpoint Temperature in GEM

Published February 7th, 2025 by Brian Matheron

You can update your temperature settings, temporarily or permanently, using GridPoint Energy Manager (GEM). Temporary Override Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Select a site. Go to Control > HVAC. Select the HVAC unit(s) you want to override. HVAC Tab includes the following information: Occupied Times Com

ADM Micro EMS Controller (ADM-1204) Network Configuration

Published October 8th, 2025 by Brian Matheron

Select (touch) English to display the Lighting Schedule screen. Two touches will normally be required as the first touch will serve to only activate the touch screen: If a screen other than the English/Espanol screen is displayed, select either Menu or Exit until the Options Menu screen is displayed and skip to Step 3 below.  On the Lighting Schedul

Systems - GridPoint Intelligence - Installer App Guide

Published June 27th, 2025 by Brian Matheron

Overview Unlike the GridPoint Intelligence Admin page, which is used to replace existing equipment, the GridPoint Installer App is used to add new devices to sites. Accessing the Installer App will also help you navigate technicians through GridPoint Intelligence installations. Login The GridPoint Installer App uses the same web address as GridPoint

Which Controller Do I Have?

Published March 27th, 2025 by Brian Matheron

Locate your site's controller. It is frequently in a central location, such as a manager's office. If you cannot find the controller, reach out to GridPoint Support for more details. EDGE    EC2000   EC1000   EC100   1204/3612     EDGE Articles   EC2000 Articles EC1000 Articles EC100 Articles 1204/3612 Articles        

Systems - GridPoint Intelligence - Lighting Guide

Published July 15th, 2025 by Brian Matheron

Locating Lighting in GridPoint Intelligence GridPoint Intelligence lighting, like other assets, is connected to each site. Bulk actions can be applied  to lighting across multiple sites. Open GridPoint Intelligence Select your user and tenant at the top of the page from the dropdown menus. Viewing Site-Specific Lighting Click the Sites button on the

Accessing Alarms in GEM

Published February 17th, 2025 by Brian Matheron

GridPoint Energy Manager (GEM) provides alerts for site equipment, such as coolers and freezers, in the Alarms tab. These alarms can help you avoid issues, such as spoilage, caused by malfunctioning refrigeration or freezer equipment. Accessing Alarms Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Select a site or site(s)

How to Edit Site and Employee Hours in GEM

Published February 11th, 2025 by Brian Matheron

You can update site or employee hours using GridPoint Energy Manager (GEM).  Note Site and Employee hours can only be edited with the appropriate authority granted by your employer. Reach out to your facilities contact for more information.   In Browser Select a site. Go to Control > Hours. Click the black Edit button. Note Some sites will includ

TS150 User Manual

Published June 23rd, 2025 by Brian Matheron

TS150 User Manual (Click to view full screen or download)

Systems - GridPoint Intelligence - Alerts Management

Published August 7th, 2025 by Brian Matheron

What are GridPoint Intelligence Alerts? Alerts allow users to view real-time updates across multiple assets and sites. The Alerts Management page offers visibility to all your sites across the map. Overviews provide succinct summaries of any issues impacting your business along with maintenance suggestions to prevent future issues. Notifications The

Creating Custom Hours in GEM

Published February 13th, 2025 by Brian Matheron

Creating custom hours for your sites allows you to extended HVAC and lighting operation beyond your normal hours for one-off maintenance or reoccurring holidays. Creating Custom Hours Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Select a site. Click the In App Select a site. Tap the 

Equipment - Thermostat - TS200 - Not Communicating or Displaying Temperatures

Published June 16th, 2025 by Brian Matheron

Contact GridPoint Support for further steps.  

Equipment – Thermostats – TS150W – Heating Issues

Published April 17th, 2025 by Brian Matheron

Heating Issues Locate the TS150W Thermostat Check that the screen is illuminated. If there is no power to the screen, access the power issues article. Is there physical damage? If there is physical damage, contact GridPoint Support for more details. Check the thermostat’s mode and verify it is in either “heat” or “auto”. To check at the thermostat p

Equipment - Controllers - EC2000 Quick Start Guide

Published May 27th, 2025 by Brian Matheron

Quick Start Guide The EC2000 controller is the hub for GridPoint’s Energy Management System. The controller manages all on-site controls for the HVAC temperatures and lighting schedules.  The controller is usually located in the manager’s office or back room. You may notice other GridPoint equipment like thermostats, however all changes for HVAC uni

Accessing Files in GEM

Published February 13th, 2025 by Brian Matheron

GridPoint Energy Manager (GEM) houses useful files, such as commissioning paperwork and reports, related to your sites. Accessing Files In Browser In App

Accessing and Running Reports in GEM

Published February 18th, 2025 by Brian Matheron

You can run a variety of reports in GridPoint Energy Manager (GEM) to gain insight into your site and energy usage or HVAC details. Accessing Reports Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Select a site. Go to Data > Reports. Click the Site & Energy or HVAC, Schedules & Controls tab. Click the circle to

Equipment – Thermostats – TS150W – Cooling Issues

Published April 17th, 2025 by Brian Matheron

Cooling Issues Locate the TS150W Thermostat Check that the screen is illuminated. If the screen is not illuminated, access the power issues article. Is there physical damage? If there is physical damage, contact GridPoint Support for more details. Check the thermostat’s mode and verify it is in either “cool” or “auto”. To check at the thermostat phy

Systems - GridPoint Intelligence - Accessing WiFi and LoRa Details

Published June 20th, 2025 by Brian Matheron

Viewing WiFi and LoRa Details Open GridPoint Intelligence. Select GridPoint and the appropriate tenant from the dropdowns at the top of the page. Click the Site sidebar. Navigate to a site. Click the Install tab. Click the arrow next to the Equipment accordion menu. Click the three dots next to the site controller. This will pull up the WiFi and LoR

Thermostats - TS101 - Cooling Issues

Published January 6th, 2025 by Brian Matheron

Cooling Issues Locate the TS101 thermostat.   Check that the power LED is illuminated. If there is a power LED, there is no power issue. Contact GridPoint Support if you are still experiencing issues with the thermostat. Is there physical damage? If yes, contact GridPoint Support for more details. Check the thermostat’s mode and verify it is in eith

Equipment – Thermostats – TS150W – Inaccurate Temperature Readings

Published April 17th, 2025 by Brian Matheron

Inaccurate Temperature Readings Locate the TS150W Thermostat. Determine whether the temperature in question is being read by a ZSM associated to the thermostat or the thermostat itself. If the temperature is being read by the ZSM, review this article Equipment - ZSM - Troubleshooting Inaccurate Tasseron ZSM Temperature. To change the control strateg

Equipment – Thermostats – TS150W – Power Issues

Published April 17th, 2025 by Brian Matheron

Power Issues Locate the TS150W Thermostat.  Check that the screen can illuminate. If it cannot, there is an issue with power being provided to the thermostat. If it can, the TS150W is likely experiencing non-power issues. Is there physical damage? If yes, contact GridPoint Support for more details. Note: There is no backup battery in the TS150W. Any

Which Thermostat Do I Have?

Published May 22nd, 2025 by Brian Matheron

Locate your site's thermostat(s). They are generally on a wall at chest level. If you cannot locate your thermostat(s), contact GridPoint Support for more details. TS101   TS200   TS150     TS150W     TS101 Articles   TS200 Articles TS150 Articles TS150W Articles  

Equipment – Thermostats – TS150W – Fan Issues

Published April 17th, 2025 by Brian Matheron

Fan Issues Locate the TS150W Thermostat Check that the screen is illuminated. If there is no power to the screen, access the power issues article. Is there physical damage? If there is physical damage, contact GridPoint Support for more details. Check the thermostat’s fan mode and verify it is in either “on” or “auto”, depending on what the customer

Equipment – Thermostats – TS150W – Device Offline

Published April 17th, 2025 by Brian Matheron

Device Offline Locate the TS150W Thermostat Check that the screen is illuminated. If there is no power to the screen, access the power issues article. Is there physical damage? If there is physical damage, contact GridPoint Support for more details.

Update Comfort Settings on Your TS150 Thermostat

Published February 7th, 2025 by Brian Matheron

The temperature of a zone monitored and controlled by a TS150 can be adjusted at the device. Follow these steps to adjust the temperature at the TS150. Update Setpoint Temperature Locate the TS150. To pull up the settings menu, tap on the TS150 screen. Tap the Menu button (three horizontal lines) at the top right of the screen. Tap the Override butt

Override or Change the Lighting Schedule in GEM

Published February 12th, 2025 by Brian Matheron

This article will provide you with the steps needed to override or change the lighting schedule in GridPoint Energy Manager (GEM). Before making any changes, review the customer's policies regarding any changes made to site schedules.   Temporary Override Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Select a site. Go to

Systems - GridPoint Intelligence - Schedule Exceptions

Published January 2nd, 2025 by Brian Matheron

Schedule Exceptions From the site’s page, go to the Settings Library.  Scroll down to Exceptions and use the clock with the plus to start a new exception.   Name the exception and select the open date and close date. This does take two separate clicks to continue to Set Dates. You will then need to add Primary and Secondary schedules for the excepti

Equipment - Thermostats - TS200 - Not Cooling or Heating

Published June 16th, 2025 by Brian Matheron

Contact GridPoint Support for further steps.  

Equipment – Thermostats – TS150W – Inaccurate Humidity Readings

Published April 17th, 2025 by Brian Matheron

Inaccurate Humidity Readings Locate the TS150W Thermostat. Determine whether the humidity level in question is by an RSM associated to the thermostat region or the thermostat itself. If with the RSM, check RSM inaccurate humidity readings article. Breathe on the sensor (bottom of thermostat) to see if there are changes in the readings. If it continu

Equipment - Thermostat - TS200 - Power Issues

Published June 16th, 2025 by Brian Matheron

Contact GridPoint Support for further steps.    

Siemens Relays

Published April 17th, 2025 by Brian Matheron

Siemens N372 Group Address Timeclock 2000A1 Timeclock 2000A2 & B2 Timeclock 2000C1 & C2 Timeclock 2000D Config ID 1/0/1 Time Channel 1: Signs n/a n/a n/a 1 1/0/2 Time Channel 2: Parking n/a n/a n/a 2 1/0/3 Time Channel 3: Sales Normal n/a n/a n/a 3 1/0/4 Time Channel 4: Sales Maintenance n/a n/a n/a 4 1/1/0 Security: Disarm n/a n/a n/a 5 1/1

Update Country and Temperature Unit in GEM

Published February 13th, 2025 by Brian Matheron

You can update your country and temperature unit preferences in GridPoint Energy Manager (GEM). Updating Preferences Log in to GEM from a browser or the GEM app for iOS or Android. In Browser Navigate to the Settings dropdown (three (3) horizontal lines) at the top right of the screen. Click Preferences. Update preferences. Country (locale) can be s

HVAC Health Notifications

Published February 12th, 2025 by Brian Matheron

Understanding HVAC health notifications is essential for efficient HVAC functionality. While GridPoint systems help our customers control their energy usage, improperly functioning HVAC units will not run effectively or efficiently. We recommend units with issues be serviced or repaired by HVAC technicians.  Where Can I See HVAC Health Notifications

Overview - Assets

Published February 19th, 2025 by Brian Matheron

Assets Overview Assets provides insight into all equipment at all company sites. Assets can be filtered by type. HVAC Assets Lighting Assets The Assets page will display the total number of assets across all sites. Each site will display the number of assets located at that site. The Assets page will allow appropriate users to make bulk changes acro

TS200 Screen Map

Published June 16th, 2025 by Brian Matheron

Viewing Site History in GEM

Published February 13th, 2025 by Brian Matheron

Site History in GridPoint Energy Manager (GEM) includes updates and overrides for a single site completed during the selected time frame. Viewing Site History in GEM Log in to GEM from a browser. Site History is not available in the GEM app. In Browser Select a site. Click the Site History button at the top right of the page. Select a date range to

Reset Your Password in GEM

Published February 12th, 2025 by Brian Matheron

If you cannot login to GridPoint Energy Manager (GEM), follow these instructions to update your GEM login password. In Browser Navigate to the GridPoint Energy Manager (GEM) webpage. Click forgot password. Enter details and click Submit. An email will be sent to the user's register email address.  Follow the instructions in the email to reset your p

Accessing Graph Data in GEM

Published February 19th, 2025 by Brian Matheron

GridPoint Energy Manager (GEM) provides data for all of your sites equipment and energy usage. This data can be displayed in graph and table formats and exported. This information can provide insights into a variety potential issues with equipment and help sites track their energy consumption. Graphs Understanding Graphable Parameters Graph Channels