Assets Overview

Assets provides insight into all equipment at all company sites. You can filter by asset type, see total asset counts across sites, search for a specific site or piece of equipment, and make bulk changes. HVAC thermostats are grouped under the Space they belong to, and comfort settings, schedules, and overrides are managed at the Space level. 

Asset Interfaces

Controllers 

Display online status, controller name, site address, current status, last online timestamp, and options (Information, Connectivity Page).

Thermostats 

Thermostats are grouped under their Space. Each thermostat card shows online status, HVAC health indicator, name, temperature readings, humidity, current settings, schedule, mode, stage, supply air temperature, and last online time, with options to open its Information, HVAC Tests, and Connectivity pages.

Comfort settings, schedules, overrides, and Optimal Start/Stop are managed on the Space, not on the individual thermostat. Each Space has its own Settings (gear) and Override controls on the Space row.

Meters: Display online status, meter name, current consumption, total monthly consumption, last online timestamp, and settings (Information, Connectivity Page).

Refrigerators/Freezers: Show online status, unit name, current temperature, door status, sensors, and settings options. You can modify the unit type (Freezer, Cooler, Rx Cooler, Nonperishable Coolers) and customize alert threshold parameters.

Lighting: Display online status, on/off state, control status, IOM, outputs, photosensor data, last online time, and settings options (Information, Turn On/Off Lighting, Settings Page, Connectivity Page).

Asset Information Page

The information button (i) will bring users to an individual asset's Information page. This page includes detailed information, including:

• HVAC Health Report
• Overrides Data
•  

HVAC Health Report

The HVAC Health report displays the last 90 days of performance history for a given HVAC unit. Clicking on individual days will provide more details.

Overrides

The Overrides graph shows the day and duration of all overrides to the specific HVAC asset. 

Telemetry

The Telemetry section provides insights into a number of measurable data points for a specific HVAC asset during a selected period, including:

• Set Points
• Supply Air Temp
• Zone Air Temp
• Zone Humidity
• Heating
• Cooling
• Humidity Mitigation
• Outside Temp

Each data point can be toggled on or off. The graph can have the time view changed to span days, weeks, or month periods.

HVAC Details

Provides all the details for the HVAC unit itself, including any pre-existing issues.

Humidity Mitigation

Humidity Mitigation section allows for customization of the humidity mitigation feature. Humidity mitigation can be toggled on, off, or inherited from the current Comfort Setting. For more on Comfort Settings, view this GridPoint Knowledge article.

When indoor humidity hits 65% RH, Humidity Mode automatically adjusts cooling to bring humidity down without overcooling. It will pause if:

• Outdoor temp drops below 60°F
• Zone is already at or below 69°F
• A cooling fault is active
• Humidity hasn't dropped after 1 hour
• Zone temp drifts 2° above setpoint

Navigating to Assets 

Click the Assets icon (circle with three wavy lines) on the left sidebar. Use the search bar to find specific sites and view their assets.

Managing a Thermostat’s Settings and Overrides

Comfort settings, schedules, overrides, and Optimal Start/Stop are managed at the Space level:

• To change settings, open the Space’s Settings from the gear icon on the Space row, or from the Space’s three-dot menu.
• To place a temporary override, click the stopwatch icon on the Space row. The override applies to every thermostat in the Space.

For an individual thermostat, the menu offers Information, HVAC Tests, and Connectivity. To move a thermostat into a different Space, use the Spaces view (see Systems - GridPoint Intelligence - Managing Spaces). 

Applying Bulk Actions 

Use the Filter Assets dropdown and select Show Spaces (for HVAC) or Show Lighting Assets. Only apply bulk actions to one type at a time.

For HVAC, bulk actions operate on Spaces. Select the Spaces you want to change, click Apply Bulk Action, and choose the action to perform (comfort setting, schedule, exception, override profile, override, or Optimal Start/Stop).